Taolo ea Mofuta oa Ozone Split

Tlhaloso e Khutšoanyane:

Mohlala: Letoto la TKG-O3S
Mantsoe a bohlokoa:
1xON/OFF tlhahiso ea relay
Modbus RS485
Sesebelisoa sa sensor ea kantle
Alamo ea buzzle

 

Tlhaloso e Khutšoanyane:
Sesebelisoa sena se etselitsoe ho lekola moea oa ozone ka nako ea nnete. E na le sensor ea ozone ea electrochemical e lemohang mocheso le matšeliso, e nang le boikhethelo ba mongobo. Ho kenngoa ho arotsoe, ho na le molaoli oa pontšo o arohaneng le probe ea ka ntle ea sensor, e ka atolosoang ka li-ducts kapa cabins kapa e behoa kae kapa kae. Probe e kenyelletsa fene e hahelletsoeng kahare bakeng sa phallo e boreleli ea moea mme e ka nkeloa sebaka.

 

E na le liphetho tsa ho laola jenereithara ea ozone le moea o kenang, ka likhetho tse peli tsa ON/OFF relay le analoge linear output. Puisano e etsoa ka protocol ea Modbus RS485. Alamo ea boikhethelo ea buzzer e ka buloa kapa ea tima, 'me ho na le lebone la ho se sebetse ha sensor. Likhetho tsa phepelo ea matla li kenyelletsa 24VDC kapa 100-240VAC.

 


Kenyelletso e Khutšoanyane

Li-tag tsa Sehlahisoa

LIKAROLOANA

  • Nako ea 'nete ea ho lekola khatello ea ozone ea moea
  • Electrochemical ozone sensor e nang le ho lemoha mocheso le matšeliso,
  • khetho ea ho lemoha mongobo
  • Ho arola ho kenngoa ha molaoli oa pontšo le probe ea sensor ea ka ntle, probe e ka ba
  • e atolositsoe ka har'a Duct / Cabin kapa e behiloe sebakeng sefe kapa sefe.
  • Ozone sensor probe e na le fan e hahelletsoeng ka hare ho netefatsa hore moea o phalla hantle
  • Ozone sensor probe e ka nkeloa sebaka
  • 1xON/OFF relay tlhahiso ho laola jenereithara ea ozone le moea o kenang
  • 1x0-10V kapa 4-20mA analoge linear tlhahiso bakeng sa mahloriso a ozone
  • puisano ea Modbus RS485
  • Alamo ea Buzzer e teng kapa ea tima
  • 24VDC kapa 100-240VAC phepelo ea motlakase
  • Leseli la ho hloleha ha sensor

LIEKETSENG MOKHOPO

 

Lintlha tse akaretsang
Phepelo ea motlakase 24VAC/VDC±20%or 100 ~ 240VACkhethang ho reka
Tšebeliso ea Matla 2.0Wkarolelano ea tšebeliso ea matla
Wiring Standard Sebaka sa karolo ea mohala <1.5mm2
Boemo ba Mosebetsi -20~50℃/0~95%RH
Maemo a polokelo 0℃~35℃,0~90%RH (ha ho condensation)

Dimensions/ Boima ba Nete

Mookameli: 85(W)X100(L)X50(H)mm / 230gBatla:151.5 limilimithara40 limilimithara
Hokela bolelele ba thapo Bolelele ba thapo ea limithara tse 2 lipakeng tsa molaoli le sensor probe
Tšoaneleha maemo ISO 9001
Bolulo le sehlopha sa IP PC/ABS thepa ea polasetiki e sa cheng,IP ea molaolisehlopha: IP40 bakeng saG molaoli, IP54 bakeng sa A controllerSensor probe Sehlopha sa IP: IP54
Lintlha tsa Sensor
Sensing Element Electrochemical Ozone sensor
Sensor bophelo bohle >3lilemo, Sensorbothata bo ka nkeloang sebaka
Nako ea ho futhumatsa <60 metsotsoana
Nako ea Karabelo <120s @T90
Ntlafatso ea Letšoao 1s
Lekhalo la ho lekanya 0-1000ppb(ka ho sa feleng)/5000ppb/10000ppb boikhethelo
Ho nepahala ± 20ppb + 5% ho balaor ±100ppb(ho feta eng kapa eng)
Qeto ea Pontšo 1ppb (0.01mg/m3)
Botsitso ±0.5%
Zero Drift <2%/selemo
Ho Khetholla Mongobo(khetho) 1~99%RH
Litholoana
Analog Output Phallo e le 'ngoe ea 0-10VDC kapa 4-20mA linear bakeng sa ho lemoha ozone
Analog Output Resolution 16Bit
Rela sehokelo se ommeng Output Tlhahiso e le 'ngoe ea relay ho laolakhatello ea ozoneMax switjha 5A (250VAC/30VDC),khanyetso Mojaro
RS485 cOmunication Interface Protocol ea Modbus RTU e nang le 9600bpsya kamehlaTšireletso ea antistatic ea 15KV
Alamo ea buzzer Seta pele boleng ba alamoNumella / Tlosa ts'ebetso ea alamo esale peleTima alamo ka letsoho ka likonopo

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona