Sensor le Transmitter ea Khase e Ngata e ka Hare ho Liphaephe
Likarolo tsa Sehlahisoa
● Ho lemoha khase e le 'ngoe kapa likhase tse peli ka nako e le 'ngoe ka har'a liphaephe tsa moea
● Lisebelisoa tsa khase tsa electrochemical tse nepahetseng haholo tse nang le puseletso ea mocheso o hahiloeng kahare, ho lemoha mongobo ke khetho
● Fene ea ho nka sampole e hahiloeng kahare bakeng sa phallo e tsitsitseng ea moea, nako ea karabelo e potlakileng ea 50%
● Sebopeho sa RS485 se nang le protocol ea Modbus RTU kapa protocol ea BACNet MS/TP
● E 'ngoe kapa tse peli tsa tlhahiso ea analog linear ea 0-10V/ 4-20mA
● Sensor probe e ka nkeloa sebaka, e tšehetsa ho kenya ka hare le ka karohano.
● Lera le sa keneleng metsi le hahiloeng ka har'a sesebelisoa sa sensor, se etsang hore se lokele lits'ebetso tse ling.
● Phepelo ea motlakase ea 24VDC
Likonopo le Pontšo ea LCD
Litlhaloso
| Lintlha tse Akaretsang | ||
| Phepelo ea motlakase | 24VAC/VDC±20% | |
| Tšebeliso ea Matla | 2.0W()tšebeliso e tloaelehileng ea matla) | |
| Tekanyetso ea Lithapo | Sebaka sa karolo ea terata <1.5mm2 | |
| Boemo ba ho Sebetsa | -20~60℃/0~98%RH (ha ho na condensation) | |
| Maemo a Polokelo | -20℃~35℃, 0~ 90% RH (ha ho na condensation) | |
| Litekanyo/ Boima ba 'Nete | 85(Bophara)X100(L)X50(H)mm /280gPhuputso:124.5mm∮40mm | |
| Maemo a tšoanelehang | ISO 9001 | |
| Bolulo le sehlopha sa IP | Thepa ea polasetiki e sa cheseng ea PC/ABS, IP40 | |
| Ozone (O3)Lintlha tsa Sensor (Khetha O3 kapa NO2) | ||
| Li-sensor | Sensor ea lik'hemik'halele>3selemonako ea bophelo | |
| Sebaka sa tekanyo | 10-5000ppb | |
| Qeto ea tlhahiso | 1ppb | |
| Ho nepahala | <10ppb + 15% ea ho bala | |
| Lintlha tsa Monoxide ea Khabone (CO) | ||
| Li-sensor | Sensor ea lik'hemik'halele>5selemonako ea bophelo | |
| Sebaka sa tekanyo | 0-500ppm | |
| Qeto ea tlhahiso | 1ppm | |
| Ho nepahala | <±1 ppm + 5% ea ho bala | |
| Naetrojene Dioxide (N)O2) Lintlha (Khetha efe kapa efeNO2kapaO3) | ||
| Sensor | Sensor ea lik'hemik'halele>3selemonako ea bophelo | |
| Tekanyo ea Sebaka | 0-5000ppb | |
| Qeto ea Tlhahiso | 1ppb | |
| Ho nepahala | <10ppb+15% ea ho bala | |
| Liphetho | ||
| Tlhahiso ea Analog | E le 'ngoe kapa tse peliTlhahiso e otlolohileng ea 0-10VDC kapa 4-20mAs | |
| Qeto ea Tlhahiso ea Analog | 16Bit | |
| RS485 cSebopeho sa puisano | Modbus RTUor BACnet MS/TPTšireletso e sa fetoheng ea 15KV | |
HLOKOMELA:
Paramethara ea ho lemoha e khethiloeng: formaldehyde.
Tse ka holimo ke mefuta e tloaelehileng ea litekanyo, 'me mefuta e meng e ka fetoloa hore e be ea hau.
Litlhaloso
